| properties | ||
| Drewplus* L-3500 FCA | Drewplus* L-3510 FCA | |
| Appearance | Colorless to light yellow, slightly hazy liquid | Colorless to light yellow, slightly hazy liquid |
| Specific gravity | 0.91 g/ml | 0.90g/ml |
| Viscosity(Brookfield RVT #120 rpm, 25℃) | 60 mPa.s | 45 mPa.s |
| Solubility | Insoluble in water,dispersible in surfactant containing systems | Insoluble in water,dispersible in surfactant containing systems |
This data represents typical values and should not be considered as specifications.
use
Drewplus*L-3500 foam control agent is formulated for use in water-based coatings, particularly pigmented but also in clear systems. Drewplus* L-3510 foam control agent is formulated for use in water-based clear coatings. The most optimum performance is provided when added under low to moderate shear conditions. Incorporation should preferably be done after incorporation of the rheology modifiers.
Recommended dosage levels in % based on weight of total formulation:
| Coating System | ||
| Clear/Non-pigmented | pigmented | |
| Drewplus* L-3500 FCA | 0.3-0.8 | 0.5-1.5 |
| Drewplus* L-3510 FCA | 0.5-1.0 | |
packaging
Drewplus*L-3500/L-3510 foam control agents are packed in 25 kg open-head PE pails and 181 kg (net) steel drums. Under normal storage conditions, Drewplus* L-3500 / L-3510 foam control agents have good stability. To ensure homogeneity, it is recommended to stir the product before use.
Product safety & regulations
Read and understand the Safety Data Sheet (SDS) before using this product.
With respect to SVHC, please note that it does not contain any substances mentioned in the REACH SVHC candidate list at or above 0.1% updated by ECHA latest on 16th July 2019. This determination is based upon formulation and available raw material information. Ashland is providing this information for its products as formulated. Should you have additional questions, please contact your Ashland technical service representative.
*Drewplus is a registered trademark of a third party.
