ADVANTAGES
• Good resistance to carbamation and water-spotting
• Fast cure and development of properties at ambient and low temperature
• Good chemical resistance
• Low viscosity
APPLICATIONS
• Chemically resistant high solids and solvent-free coatings
• Industrial flooring applications such as self-leveling floors and mortor floors
• Accelerator for other curing agents
SHELF LIFE
At least 12 months from the date of manufacture in the original sealed container at ambient temperature.
STORAGE AND HANDLING
Refer to the Material Safety Data Sheet for Ancamine 2519 curing agent.
| TABLE 1: TYPICAL PROPERTIES | |
| Appearance | Clear light, yellow liquid |
| Color (Gardner)① | <2 |
| Viscosity @ 25°C [mPa.s] ② | 185 |
| Amine Value (mg KOH/g) ③ | 315 |
| Specific Gravity @ 25°C [g/ml] | 1.01 |
| Flash Point (closed cup), [°C] | >100 |
| AHEW | 95 |
| Recommended Use Level phr (EEW=190) | 50 |
| TABLE 2: TYPICAL HANDLING PROPERTIES | |
| Mixed Viscosity @ 25°C (mPas)② | 1900 |
| Gel Time (150g mix at 25°C), [min] ④ | 23 |
| Thin Film Set Time @ 25°C, [h] ⑤ | 3.5 |
| Thin Film Set Time @ 10°C, [h] ⑦ | 16.0 |
| Peak Exotherm (°C) 150 g mass @ 25°C | 181 |
| Shore D 20°C (4/8/24 h) | |
| Shore D 10°C (16/24 h) | |
| Shore D 10°C (16/24 h) | |
| TABLE 3: TYPICAL PERFORMANCE PROPERTIES | |
| Compressive Strength⑥ [Mpa] | 77 |
| Compressive Modulus⑥ [Gpa] | 2.0 |
| Tensile Strength⑦ [Mpa] | 53 |
| Tensile Modulus⑦ [Gpa] | 6.7 |
| Flexural Strength⑧ [Mpa] | 90 |
| Flexural Modulus⑧ [Gpa] | 2.9 |
| HDT [ºC] | 45 |
Footnotes:
(1) Gardner scale
(2) Brookfield RVTD, Spindle 4
(3) Perchloric Acid Titration
(4) Techne GT-4 Gelation Timer
(5) BK Drying Recorder
(6) ISO 604
(7) ISO 527
(8) ISO 178
