ADVANTAGES
• Low VOC and low emission
• Rapid cure and property development at ambient and low temperature
• Good chemical resistance
• Good resistance to amine blush and water spotting at ambient temperature
APPLICATIONS
• Industrial flooring
• Chemically resistant mortars and high-solid coatings
• Secondary containment linings
STORAGE LIFE
At least 24 months from the date of manufacture in the original sealed container at ambient temperature. Store away from excessive heat and humidity in tightly closed containers.
STORAGE AND HANDLING
Refer to the Material Safety Data Sheet for Ancamine 2823. The product may have slight floccule during the storage or process, which can be easily homogenized by gentle agitation without impact on curing properties.
TYPICAL CURING CONDITION
2-7 days at ambient temperature
| TABLE 1: TYPICAL PROPERTIES | |
| Appearance | Yellow Liquid |
| Colour (Gardner) | 3 |
| Viscosity@25℃(cP) | 200-500 |
| Amine Value(mg KOH/g) | 290-335 |
| Specific Gravity @23℃ | 1.01 |
| Equivalent Wt/{H} | 102 |
| Recommended Use Level(phr) | 50 |
| TABLE 2: TYPICAL HANDLING PROPERTIES* | |
| Gel Time 23°C(150g mix,mins) | 81 |
| Thin Film Set Time 23°C(hrs) | 10 |
| TABLE 3: TYPICAL PERFORMANCE* | |
| (7 day cure @ 23°C) | |
| Compressive Strength(MPa) | 85 |
| Tensile Strength(MPa) | 52 |
Tensile Modulus(GPa) | 2.6 |
| Tensile Elongation(%) | 8.9 |
| Glass transition temperature(°C),2nd scan | 62 |
| Shore D Hardness | |
| @23C(1 day /2 days cure) | 77/83 |
| @10C(1day/2 days cure) | 38/72 |
| Carbamation Test(Water immersion）， scale 1-5(5 is best） | |
| @23°C(1day/2 days cure) | 5/5 |
| @10℃(1day/2 days cure) | 4/5 |
* Ancamine 2823 formulated with 90% standard bisphenol- A(DGEBA, EEW=190) resin and 10% reactive diluent Epodil 748.
