ADVANTAGES
• Rapid dry speed at ambient and low temperatures
• Excellent resistance to carbamation
• Excellent pigment acceptance and colour stability through potlife
• Low colour and good yellowing resistance
• Excellent adhesion to damp concrete
APPLICATIONS
• Concrete primers (100-500 g/m2)
• Pigmented concrete coatings (100-500 g/m2)
SHELF LIFE
At least 12 months from the date of manufacture in the original sealed container at ambient temperature.
STORAGE AND HANDLING
Refer to the Material Safety DataSheet for Anquamine 728 curing agent.
| TYPICAL PROPERTIES | |
| Appearance | Clear yellow liquid |
| Colour① (Gardner) | <4 |
| Viscosity② @ 25°C (Pa.s) | 10-20 |
| Solids (wt%) | 53-57 |
| Amine Value③, [mg KOH/g] | 130-200 |
| Specific Gravity @ 25°C | 1.07 |
| AHEW (theoretical) | 250 |
Recommended Use Level with solid epoxy dispersion④(PHR) | 34 |
Recommended Use Level with liquid epoxy resin⑤(PHR) | 125-130 |
| TYPICAL PERFORMANCE PROPERTIES6 | |
| Applied thickness (g/m2) | 100-500 |
| Pot-life by gloss8 at 23˚C (minutes) | 50-60 |
| Time to Dry-Hard⑨ at 10˚C (h) | 3-4 |
| Pendulum Hardness⑩ at 10˚C, after 24h and 7d (s) | 200 / 330 |
| Carbamation resistance⑪ at 10˚C (Rating 1-5) | 4-5 |
| Adhesion⑫ to B25 concrete slab at 10°C(MPa/ Mode-%) | 6.0 / >90% A |
| TYPICAL PERFORMANCE PROPERTIES7 | |
| Applied thickness (g/m2) | 100-500 |
| Pot-life by gloss⑧ at 23˚C (minutes) | 120 |
| Time to Dry-Hard⑨ at 10˚C (h) | 8 |
| Pendulum Hardness⑩ at 10˚C, after 24h (s) | 120 |
| Carbamation resistance⑪ at 10˚C (Rating 1-5) | 5 |
| Colour stability over pot-life⑬∆E | <2.5 |
Footnotes:
(1) ASTM D1544
(2) Brookfield RV, Spindle 27
(3) Perchloric acid titration
(4) With Ancarez® AR-555 solid epoxy resin dispersion, EEW550, at 75% stoichiometry
(5) With standard bisphenol A diglycidyl ether, EEW190, at 100% stoichiometry
(6) Concrete primer based on Anquamine 728 and Ancarez AR-555
(7) White topcoat based on Anquamine 728 and Bis-A/F liquid epoxy resin diluted with Epodil 748 reactive diluent, EEW 190-200, viscosity ca. 1,000 mPa.s
(8) ISO 9514 (Gloss)
(9) ASTM D1640 (Dry-Hard)
(10) ASTM D4366 (Persoz pendulum)
(11) ISO 2812 (Wet Patch)
(12) ISO 4624 (Pull-Off Adhesion), A= concrete cohesive failur
(13) Rub-out test over the pot-life using a commercial tinting paste
