Products Center
Products Center
Provide high-quality production materials to customers
Anquamine® 735
Anquamine® 735
Anquamine® 735
Anquamine® 735
Epoxy Curing Agents and Modifiers
Anquamine 735 curing agent is a water-based curing agent specifically designed for standard liquid epoxy resin. It is a cost-effective material for high-film build concrete coatings and is particularly suitable for water-based self leveling systems. Anquamine 735 curing agent can easily emulsify standard liquid epoxy resins without the need for emulsifiers or pre-emulsified epoxy resins. Formulations based on Anquamine 735 curing agent enable highly decorative functional floors without the requirement of plasticizers or solvents.
Category:Hardener

BENEFITS

• Cost effective

• Rapid hardness development

• Excellent adhesion to concrete

• Low color and good yellowing resistance

• Excellent surface appearance

• Zero VOC


735.jpg

APPLICATIONS

• Self-leveling floors

• Mortars

• Grouts


STORAGE AND HANDLING

Refer to the Material Safety DataSheet for Anquamine 735 curing agent.


TYPICAL CURE SCHEDULE

• 2 to 7 days at ambient temperature.


TYPICAL PROPERTIES
AppearanceAmber Liquid
Color① (Gardner)<5
Viscosity② @ 77°F (cPs)5-15,000
Amine Value③ (mg KOH/g)240
Specific Gravity @ 77°F1.05
Total Solids Content (wt %)55
Equivalent Wt/{H}200
Recommended Use Level, (phr EEW 190)100


TYPICAL HANDLING PROPERTIES* 
Pot Life35-50 min


TYPICAL PERFORMANCE*
1 day Shore D (25°C, 55% RH)67
7 day Shore D (25°C, 55% RH)80
Compressive Strength4 after 28 days (psi)5800


* Self-leveling starting point formulation.

(1) ASTM D 1544-04

(2) Brookfield RV, Spindle 34

(3) Perchloric Acid Titration

(4) ASTM C579